Hawking Technologies HD45B Manual de usuario descargar pdf (Pagina 45)

802.11 Draft-N, or 802.11g) will be able to connect to this

access point.

If you select 2.4GHz (B+G), then only wireless clients using

802.11b and 802.11g band will be able to connect to this

access point.

If you want to allow 802.11b, 802.11g, and 802.11 Draft-N

clients to connect to this access point, select 2.4GHz

(B+G+N).

5GHz Band

5GHz (A): this mode allows 802.11a wireless network client

to connect this router (maximum transfer rate 54Mbps for

802.11a clients).

5GHz (N): this mode allows 802.11n wireless network client

to connect this router (maximum transfer rate 450Mbps for

802.11n clients).

5GHz (A+N): this mode allows 802.11a and 802.11n

wireless network client to connect this router (maximum

transfer rate 54Mbps for 802.11a clients, and maximum

450Mbps for 802.11n clients).

SSID (3): Please input the ESSID (the name used to identify this

wireless access point) here. You can input up to 32

alphanumerical characters. PLEASE NOTE THAT ESSID

IS CASE SENSITIVE.

Channel Number (4): The HD45B transmits in both 2.4GHz and 5GHz WiFi

frequencies. Please select a channel number you wish to use.

Please note that this should be the same channel as the other

WDS devices you plan to connect to.

Mac Address (5): Please input the MAC addresses of the other WDS devices

you wish to make a connection with.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 96 97

Sin comentarios

Hawking Technologies HD45B Manual de usuario Pagina 45