Hawking Technologies HD45B Manual de usuario descargar pdf (Pagina 42)

2.4GHz Band

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only

wireless clients using the wireless band you select (802.11b,

802.11 Draft-N, or 802.11g) will be able to connect to this

access point.

If you select 2.4GHz (B+G), then only wireless clients using

802.11b and 802.11g band will be able to connect to this

access point.

If you want to allow 802.11b, 802.11g, and 802.11 Draft-N

clients to connect to this access point, select 2.4GHz

(B+G+N).

5GHz Band

5GHz (A): this mode allows 802.11a wireless network client

to connect this router (maximum transfer rate 54Mbps for

802.11a clients).

5GHz (N): this mode allows 802.11n wireless network client

to connect this router (maximum transfer rate 450Mbps for

802.11n clients).

5GHz (A+N): this mode allows 802.11a and 802.11n

wireless network client to connect this router (maximum

transfer rate 54Mbps for 802.11a clients, and maximum

450Mbps for 802.11n clients).

Channel Number (3): Please select a channel number you wish to use. Please

note that this should be the same channel as the other bridge

you wish to connect to.

Mac Address (4): Please input the MAC addresses of the other bridges you

wish to make a connection with.

Set Security (5): Click this button to select an encryption mode for this

wireless link, a new popup window will appear. Note: the

security must be the same on the other bridges.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 96 97

Sin comentarios

Hawking Technologies HD45B Manual de usuario Pagina 42